The MRV328 is a new receiving card developed by NovaStar. A single MRV328 loads up to 256×256 pixels.
The MRV328 supports pixel level brightness and chroma calibration, which effectively removes color difference, greatly improves display consistency of LED images, and presents finer displays to users.
Software and hardware designs of the MRV328 have fully concerned users’ deployment, operating and maintenance scenarios, enabling easier deployment, more stable operating and more efficient maintenance.
Hardware design:
ntegrates 8 standard HUB75 connectors, which makes the HUB board unnecessary.
Adopts the Gigabit Ethernet port, which can connect to the PC.
Software design:
Supports pixel level brightness and chroma calibration.
Supports setting of images pre-stored in the receiving card.
Supports status detection of temperature, voltage, Ethernet cable communication and video source signals.
Supports the 5-pin LCD module.
Novastar MRV328 Receiving Card with 8 HUB75 ports Parameter:
Features
Description
Supporting pixel level brightness
and chroma calibration
Brightness and chroma calibration
on NovaLCT for each pixel could
remove color difference effectively,
make the brightness and chroma
of the whole screen highly consistent,
and improve the display effect.
Supporting setting of images
pre-stored in the receiving card
On NovaLCT, the specified images
could be set as the screen startup
image and images used when the
Ethernet cable is disconnected or
no video source signal is available.
Supporting status detection
of temperature, voltage,
Ethernet cable communication
and video source signals
On NovaLCT, the status of receiving
card’s temperature, voltage,
Ethernet cable communication and
video source signals can be detected.
Supporting LCD module
Supports NovaStar’s general 5-pin
LCD module. The LCD module is
connected to the HUB board to
display temperature, voltage, single
operating time and total operating
time of the receiving card.
Supporting readback of configuration file
On NovaLCT (V5.0.0 or later), the
configuration information stored in
the receiving card can be read back.
Supporting readback of firmware version
On NovaLCT (V5.0.0 or later), the
firmware versions of the receiving
card can be read back.
The MRV328 is applied to the LED display synchronous system which is generally composed of the LED display, receiving card, LED display controller (optional) and controller peripherals. The receiving card is connected to the LED display over HUB connectors.
The synchronous system requires connecting a computer to display the computer’s images and texts on the LED display. The synchronous system’s structure is shown in the following figure.
Figure 6-1 Sending card mode:
Figure 6-2 No sending card mode:
Input voltage
DC 3.3 V–5.0 V
Rated current
0.5 A
Rated power consumption
2.5W
Operating temperature
-20°C–70°C
Storage temperature
-20°C–70°C
Operating humidity
10% RH–90% RH
Dimensions
144.0 mm x 91.5 mm x 16.0 mm
Net weight
85.5 g
Certifications
EMC Class A RoHS
Packing
An antistatic bag and anti-collision
foam are prepared for eachreceiving
card.
Dimensions of the packing box:
650.0 mm x 500.0 mm x 200.0 mm,
100 receiving cards in each box.
More Pictures of Novastar MRV328 Receiving Card with 8 HUB75 ports:
Download Specification of Novastar MRV328 Receiving Card with 8 HUB75 ports:
Terms&Conditions of Novastar MRV328 Receiving Card with 8 HUB75 ports:
Delivery time: within 8 working days upon receiving payment..
Payment method: Paypal and credit card are preferred.
Packaging strong cardboard carton.
Warranty: two years.
Shipping method: DHL express is the default method. Others like EMS, UPS, FedEX and TNT will be adopted only when DHL is not available or not suitable at the destination; If you would like to ship the goods by sea or by air, please contact us for details
Remark : Full technical support will be provided only when you order both LED modules(LED display) and controller system from our company.
รีวิว
ยังไม่มีบทวิจารณ์